Driving steps



Automatic car

 Before you start ODD car must recognize the Automatic Gearbox (English: gearboxes), and find out the meanings of the letters on it, which is as follows:

 [1] Volume 0% (P) Represented (Park) in English, used when stopping the car and getting off of it. 

(R) Represented (Reverse) in English, used for driving backwards. 

(N) They are (Neutral) in English, and should not be used when driving, but rather when the vehicle is stopped for a short time.

 (D) represents (Drive) in English, and allows the vehicle to move forward. 

To drive the automatic car, you must follow the following steps:


  •  [1] When getting to the car, the spare parts are on (P). 
  • Place the right foot on the left pedal (the brake) and press it, and start the car using the switch or the start button, while keeping the foot on the brake, then transfer the gear to (D) to drive forward, or (R) to drive back. 


  • Lift the foot off the brakes and this will make the car move forward slightly.
  •  You may need more gasoline when going up a hill or moving more quickly, by pressing the right pedal (the gas pedal).
  •  When stopping the car, the brakes must be pressed, the gear is moved to (P), and the vehicle is turned off.

 Handmade car 

The driving parts of the hand car must be identified, as follows:


  •  [2] Pedals: Gas and brake pedals are located in the same places in automatic cars, and at the far left there is an additional pedal called the clutch, and the right foot is used for gas and brake pedals, but the left foot is used to press the clutch pedal when changing speeds.
  •  Lime stick: There are numbers on the lime stick, along with (R) to go back.
  •  Parking brake or parking brake : Unlike the parking gear in automatic cars, the parking brake must be set when parking, or when the vehicle rolls. 

To drive an ordinary gear car, you must follow the following steps:



  •  [2] The clutch pedal is depressed on the left foot before starting the vehicle.
  •  The brake pedal is depressed. 
  • Turn the key or press the start button to start playing. 
  • With the clutch pressed, the gear is placed on the first gear.
  •  Lift the foot from the brake pedal.
  •  Lifting the engine to between 1500 rpm and 2000 rpm, as less than that causes the car to stop and start again.
  •  When the engine reaches the required number of turns, the leg should start slowly lifting the clutch to release it, so that the vehicle starts to move slowly. 
  • If the car stops at this point, the pressure on the accelerator must be removed, then the parking brake and the clutch pedal must be pressed to place the vehicle again in the neutral position. 
  • When moving, the accelerator pedal must continue to be slowly pushed, when the car engine reaches approximately 3000 rpm, the clutch pedal is pushed down and shifted to the second gear.
  •  When stopping, the clutch pedal and the brake should be depressed and the gear stick moved to neutral.
 Advantages and disadvantages of automatic and manual cars The advantages and disadvantages of automatic cars:

  •  [3] More comfortable to drive in refills.
  •  More expensive than manual cars.
  •  More fuel efficient than its manual counterparts. 
The advantages and disadvantages of manual cars:

  •  [3] Usually less expensive than automatic operation.
  •  The driver has full control over the selection of refills.
  •  Driving can become boring in crowding.


0 Comments:

Post a Comment

Contact

Talk to us

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Dolores iusto fugit esse soluta quae debitis quibusdam harum voluptatem, maxime, aliquam sequi. Tempora ipsum magni unde velit corporis fuga, necessitatibus blanditiis.

Address:

9983 City name, Street name, 232 Apartment C

Work Time:

Monday - Friday from 9am to 5pm

Phone:

595 12 34 567




Your download will begin in 3 seconds.


smmpak darusslam